- Flow Switch
- Pressure
- Flow Meter
- Water Analyzer
- Level & Depth
- Temperature & Humidity
- Flow Sensor
- Valve & Accessory
- Add: No.116, KWOK SHUI ROAD, Kwai Chung Industry Center, HongKong
- Tel: (0086) 131-6636-9204
- Fax: (0086) 400-852-8332
- Email: hongkong@ayite.net
Adjustable Differential Pressure Switch
- Sterile Stainless Steel Pressure Differential
- smart structure, easy install, easy adjust.
- Dirt Resistant
- CE certificate
- Product description: pressure differential switch will react to pressure difference of two points, If the pressure between these points is higher than the pressure setpoint, then it "reacts". This differential pressure sw
Product introduction
This differential pressure switch is similar as UE 24-01 series and Dywer DXW-11-153 series differential pressure switch, could replace them with a very low price, to save the cost.
The pressure differential switch will react to pressure difference of two points, If the pressure between these points is higher than the pressure setpoint, then it "reacts". The GE-511 Differential Pressure switch adopt stainless steel material or brass material, smart structure, easy install, easy adjust.
The Differential Pressure Switch is a new type pressure and flow monitor switch, when the water flow (differential pressure) in system rises up or falls down to one set value, it will output a warning or sent switch-off signal to automatic control system. And it could also be used to indicate the status of pump or water filter.
It could avoid the shortcomings of annual inspection or changing target Flow Switch for water chiller unit so it could be applied widely in the water protection, status feedback of pump and by-pass control of differential pressure in evaporator and condenser in medium and large sized water chiller unit.
Specification:
* Max Voltage 250V, Max Current 3A
* Output: Single SPDT Switch
* Connection: G1/4" Female or NPT1/4"
* Material: SS304 SS316L or Brass
* Max Static Pressure: 20bar
* Repeatability: 1% Span
* Accuracy: 0.001Mpa
* Easy External Adjustment
* NEMA 4 Enclosure, Watertight Conduit Connector
Technology Data:
Type
Pressure Setpoint Range
Switching Differential Set To
Output
GE-511A100
15~100k Pa
6k Pa
1x3A SPDT
GE-511A200
20~200k Pa
10k Pa
1x3A SPDT
GE-511A300
30~300k Pa
15k Pa
1x3A SPDT
GE-511A Series is Pressure Differential Switch with single adjustable setpoint. The adjustable differential pressure switch could be calibrated directly by manufacturer according to customer's requirement, and printed the calibrated value on the label of product, so user needs not readjust in the field. The customer could calibrate by professional instrument according to the differential pressure required by equipment, and A.YITE COMPANY could provide relevant service.
Type
Adjustable Range of setpoint
Deadband
GE-511C100
15-100Kpa
0.725psi
GE-511C200
20-200Kpa
1.45psi
GE-511C300
30-300Kpa
2.175psi
GE-511C differential pressure switches adopt stainless steel material, dirt resistant, sterile, sanitary. This differential pressure switch offers a large adjustable pressure range for the pressure setpoint, from 1psi to 43.5psi. It adopt precision snap-acting switch and sensitive diaphragms combine to provide a narrow deadband and one-percent span repeatability.
OEM & Customized Products Service:
1. Connection could be NPT1/4", BSP1/4" or others
2. Material could be SS316, SS316L SS316Ti or others